USED DELKOR TFS

Used Equipment Facts About This Machine
MANUFACTURER INFORMATION
Delkor Systems manufactures automated secondary packaging equipment, including tray and case formers, packers, closers, and palletizing systems. Its forming equipment is designed to erect corrugated or paperboard trays, cartons, and cases for integration into packaging lines.
MAIN PRODUCT DESCRIPTION
Used Delkor Model TFS automatic hot-melt glue tray former rated for speeds up to 80 trays per minute, depending on tray dimensions, blank design, and operating conditions. The stainless steel machine handles layflat blanks ranging from approximately 5 to 25 inches long and 3 to 20.25 inches wide. Its listed formed tray range is approximately 3 to 14.25 inches long, 3 to 20.25 inches wide, and 1 to 7 inches high. The system features suction-cup pick-and-place blank infeed, a Nordson hot-melt glue system with hoses, an Allen-Bradley PLC, and a color touchscreen HMI. Listed utilities are 5 SCFM at 80 PSIG and 480-volt, three-phase, 60 Hz electrical service. Serial number SP2652. Aaron Equipment stock number 73680001.
SPECIFICATIONS

Equipment type: Automatic hot-melt glue tray former
Manufacturer: Delkor
Model: TFS
Serial number: SP2652
Maximum rated speed: Up to 80 trays per minute
Speed qualification: Dependent on product and package size
Layflat blank length range: Approximately 5 to 25 inches
Layflat blank width range: Approximately 3 to 20.25 inches
Formed tray length range: Approximately 3 to 14.25 inches
Formed tray width range: Approximately 3 to 20.25 inches
Formed tray height range: Approximately 1 to 7 inches
Blank infeed: Suction-cup pick-and-place system
Glue system: Nordson hot-melt system
Glue-system hoses: Included
Construction: Stainless steel
Controls: Allen-Bradley PLC
Operator interface: Color touchscreen HMI
Compressed-air requirement: 5 SCFM at 80 PSIG
Electrical service: 480 volts
Phase: Three-phase
Frequency: 60 Hz
Stock number: 73680001

APPLICATIONS

Automatic corrugated tray forming
Hot-melt glue tray sealing
Retail-ready packaging production
Shelf-ready packaging production
Display-tray forming
Product collation tray production
Food and beverage secondary packaging
Consumer packaged goods packaging
Dairy and refrigerated-product packaging
Snack-food tray forming
Household-product packaging
Personal-care product packaging
Pharmaceutical secondary packaging
Contract packaging
End-of-line packaging automation

Delkor’s current forming-equipment portfolio is designed for corrugated and paperboard trays, cartons, and cases in automated packaging operations.
SUITABLE PRODUCTS AND PACKAGE TYPES

Corrugated display trays
Retail-ready trays
Shelf-ready trays
Product collation trays
Open-top shipping trays
Club-store trays
Paperboard trays
Corrugated packaging blanks
Food-product trays
Beverage multipack trays
Canned-product trays
Bottled-product trays
Carton and pouch display trays
Household-product trays
Personal-care product trays

Actual compatibility depends on blank dimensions, board grade, flute, score pattern, tray design, glue pattern, production speed, and available tooling.
PRODUCT DETAILS

Automatic hot-melt glue tray forming machine
Rated for speeds up to 80 trays per minute
Wide layflat blank size range
Formed tray heights from approximately 1 to 7 inches
Suction-cup blank pick-and-place infeed
Nordson hot-melt glue system included
Glue hoses included
Stainless steel construction
Allen-Bradley PLC controls
Color touchscreen HMI
480-volt, three-phase, 60 Hz electrical service
Low listed compressed-air requirement
Serial number SP2652
Available as Aaron Equipment stock number 73680001

FAQS

WHAT TYPE OF PACKAGING MACHINE IS THIS?
This is a Delkor Model TFS automatic tray former that erects flat packaging blanks and seals the trays with hot-melt adhesive.
HOW FAST CAN THE DELKOR TFS RUN?
The machine is rated for speeds up to 80 trays per minute. Actual speed depends on the blank design, tray dimensions, board condition, glue pattern, and production setup.
WHAT LAYFLAT BLANK SIZES CAN IT HANDLE?
The listing states a layflat blank range of approximately 5 to 25 inches long and 3 to 20.25 inches wide.
WHAT FORMED TRAY SIZES CAN IT PRODUCE?
The listed formed tray range is approximately 3 to 14.25 inches long, 3 to 20.25 inches wide, and 1 to 7 inches high.
DOES THE MACHINE INCLUDE A HOT-MELT GLUE SYSTEM?
Yes. The listing states that a Nordson hot-melt glue system and hoses are included. The exact Nordson model, tank capacity, and applicator configuration are not specified.
HOW ARE THE FLAT BLANKS FED INTO THE MACHINE?
The machine uses a suction-cup pick-and-place blank infeed system.
WHAT CONTROLS ARE INSTALLED?
The listing identifies an Allen-Bradley PLC and a color touchscreen HMI. The specific control models are not provided.
IS THE MACHINE STAINLESS STEEL?
Yes. The listing states that the machine is of stainless steel construction.
WHAT ELECTRICAL SERVICE IS REQUIRED?
The listed electrical requirement is 480 volts, three-phase, 60 Hz.
HOW MUCH COMPRESSED AIR DOES IT REQUIRE?
The listed requirement is 5 SCFM at 80 PSIG.
CAN THE MACHINE RUN MY CURRENT TRAY DESIGN?
Compatibility should be verified using a tray drawing or physical blank. Important details include blank length and width, formed dimensions, board grade, flute, score pattern, glue locations, and desired production speed.
CAN AARON EQUIPMENT HELP EVALUATE MY PACKAGE?
Yes. Provide a blank drawing, formed tray dimensions, board specifications, target rate, product type, glue pattern, and line-layout information so Aaron Equipment can help evaluate the application.
CAN THE MACHINE BE INSPECTED OR TESTED?
Contact Aaron Equipment to discuss inspection availability, a possible test run, additional photographs, operating video, included tooling, and equipment documentation.
DOES AARON EQUIPMENT HELP WITH SHIPPING?
Yes. Aaron Equipment can assist with loading and freight coordination. Buyers should confirm the machine’s overall dimensions, weight, center of gravity, electrical-panel position, glue-system shipping requirements, and whether any components must be removed for transportation.
PRODUCT DETAILS

used Delkor tray former
Delkor TFS tray former
automatic hot melt tray former
used glue seal tray former
stainless steel tray former
80 tray per minute tray former
automatic corrugated tray former
Nordson glue tray former
packaging tray forming machine
used Delkor packaging equipment
hot melt glue packaging machine
automatic tray erecting machine
corrugated tray former
retail ready packaging equipment
shelf ready tray former
pick and place tray former
suction cup blank feeder
Allen Bradley tray former
stainless steel packaging machine
secondary packaging equipment
display tray forming machine
automatic glue seal former
buy used Delkor tray former
used Delkor TFS for sale
buy used automatic tray former
used glue seal former for sale
sell Delkor packaging equipment
sell used tray former
surplus packaging machinery
preowned tray forming machine
used packaging equipment dealer
used end of line equipment supplier
used Delkor TFS automatic hot melt tray former
Delkor tray former with Nordson glue system
used stainless steel corrugated tray forming machine
automatic tray former rated for 80 trays per minute
used tray former with Allen Bradley PLC
hot melt glue tray former for retail ready packaging
automatic display tray forming equipment
used pick and place corrugated blank former
Delkor packaging machine for shelf ready trays
480 volt automatic glue seal tray former