USED 2022 Okamoto ACC20-40SA1, 2022, MDI AUTO PROGRAMMING, EMC,

 20" x 40" Okamoto Model ACC-2040-SA1

   3-Axis Automatic Feeds,

  MDI Touchscreen Control,

 Saddle-Type Surface Grinder,

** In Plant/Under Power **

** Available Immediately **

CHUCK SIZE:................. 39.4"

TABLE WIDTH:................ 19.7"

TABLE LENGTH:............... 40"

GRINDING WHEEL DIAMETER:.... 14"

Longitudinal Feed:

Hydraulic Feed Rate.............. 1 - 82 fpm

Cross Feed:

Manual Cross Feed,

  per Rev. of Handwheel ......... 0.2"

Graduation of Hand Wheel......... 0.0008"

Automatic Feed (Intermittent).... 0.02" - 0.79"

Automatic Feed (Continous)....... 0.004" - 0.04" ipm

Vertical Feed:

Automatic Incremental Downfeed

 (Traverse & Plunge)

 (10 Steps) ................... 0.00005" - 0.0015"

Manual Pulse Feed ............. 0.001"/0.01"/0.05"

                            per revolution of hand wheel

Graduation of Hand Wheel

 (X0.1/X1/X5).................. 0.00001"/0.0001"/0.0005"

Number of Sparkout .............. 0 - 5

Rapid Feedrate .................. 23.6" ipm

Machine Features:

Highly rigid construction with wide
 frame that eliminates table overhang.
Double Vee table slides.
User-friendly MDI Control set-up.
Touch Pad Control for Cross and
 Vertical Rapid Feeds.
Teach Function for Crossfeed Position.
Micro Feeder standard. High-accuracy
 flat and form grinding with programmable
 dressing and dress compensation.
AC driven vertical feed with Manual Pulse
 Generator also built into control.
All functions integrated into control.

Operation Mode Select Switch:

Grinding depth setting (grinding & dressing),

- automatic grinding (automatic grinding

   cycle operation start)

- rapid feed (vertical fast feed)

- manual (manual vertical feed)

- all modes are interlocked for safe operation.

Step Grinding Button:

Simple one-touch operation gives precise

 dressing at the specified depth. It can

 be used for manual intervention during

 automatic operation.

Vertical Grind Feed:

The automatic dressand step dress feed

(manual intervention jog feed) can be set

 by the coarse and fine dress depth switch.

 The feed depth can be set between 0.00005″

 and 0.0015″ (10 steps) for coarse grinding,

 6 steps (0.00005″ to 0.0005″) for fine

 grinding.

EQUIPPED WITH:

Variable hold neutrofier chuck control

Coolant system with paper filtration,

 and magnetic separator

Work Light & Signal Tower

Variable Speed Grinding Spindle Option

** MACHINE CUT PRIMARILY 4130 & 4140 MILD STEEL

** FULL REPLACEMENT COST, AS EQUIPPED - $130,000

** IN PLANT, UNDER POWER, AVAILABLE FOR

    IMMEDIATE INSPECTION & PURCHASE

FOR MORE INFORMATION: Call Andy at 973-497-7600