USED 2005 ATLAS COPCO ROC F7-11

Atlas Copco ROC F7-11 Drill
Make: Atlas Copco
Model: ROC F7-11
Type: Quarry Drill
Year: 2005
Hours: 10,978 Hours on Meter
Condition: Used Condition 
Rock Drill: Atlas Copco COP1840 Drifter
Engine: Caterpillar 3126 Diesel Engine 
General Model Specifications: 
Recommended Drill Bit Diameter: 76mm - 115mm (3in  - 4.5in)
Hydraulic Rock Drill: COP 1838HE, COP 1840HE, COP 1850
Impact Power: 20kW (26.8HP)
Max Working Pressure: 230 bar (3,335 PSI)
Torque: 980Nm (722 lbf/ft)
Feed:
Feed Length: 8,100mm (26ft 7in)
Travel Length: 4,770mm (15ft 8in)
Feed Rate, Max: 0.92 m/s (180 ft/min)
Feed Force, Max: 20 kN (4,496 lbf)
Tramming:
Tramming Speed: 3.6 km/h (2.2 mph)
Traction Force: 112kN (25,200lb/ft)
Track Oscillation: ±10° 
Ground Clearance: 405mm (16in)
Dust Collector
Compressor: Atlas Copco Screw Type Compressor
Working Pressure: 10.5 bar (152psi)
FAD: 143L/s (303 CFM)
Recommended Drill Bit Diameter: 76mm - 115mm (3in  - 4.5in)
Hydraulic Rock Drill: COP 1838HE, COP 1840HE, COP 1850
Impact Power: 20kW (26.8HP)
Max Working Pressure: 230 bar (3,335 PSI)
Torque: 980Nm (722 lbf/ft)
Impact Power: 20kW (26.8HP)
Max Working Pressure: 230 bar (3,335 PSI)
Torque: 980Nm (722 lbf/ft)
Feed:
Feed Length: 8,100mm (26ft 7in)
Travel Length: 4,770mm (15ft 8in)
Feed Rate, Max: 0.92 m/s (180 ft/min)
Feed Force, Max: 20 kN (4,496 lbf)
Feed Length: 8,100mm (26ft 7in)
Travel Length: 4,770mm (15ft 8in)
Feed Rate, Max: 0.92 m/s (180 ft/min)
Feed Force, Max: 20 kN (4,496 lbf)
Tramming:
Tramming Speed: 3.6 km/h (2.2 mph)
Traction Force: 112kN (25,200lb/ft)
Track Oscillation: ±10° 
Ground Clearance: 405mm (16in)
Tramming Speed: 3.6 km/h (2.2 mph)
Traction Force: 112kN (25,200lb/ft)
Track Oscillation: ±10° 
Ground Clearance: 405mm (16in)
Dust Collector
Compressor: Atlas Copco Screw Type Compressor
Working Pressure: 10.5 bar (152psi)
FAD: 143L/s (303 CFM)
Working Pressure: 10.5 bar (152psi)
FAD: 143L/s (303 CFM)
Location: Eastern USA
View Spec Sheet Below
View More Quarry Drills