GlobePharma’s new MAXIBLEND® 1-2-3 PILOT-SCALE BLENDER

One (1) New GlobePharma MAXIBLEND® 1-2-3 PILOT-SCALE BLENDER is an all stainless-steel self-contained tumble blender for use with powders.

FEATURES:

Interchangeable shells of pharmaceutical finish.

Can accommodate both V-shells, double cones and bins of 1, 2 and 3 cu.ft. working capacity.

All stainless steel construction and on casters

Built-in lift system to raise and lower the shells (Optional)

Easy loading of materials into the shells.

PLC controls

Optional high-speed solids intensifier bars for both V-shells as well as bins

Optional portable safety guard and other standard safety features

Blender automatically stops at home position after blending is completed.

Optional variable speed shell and intensifier bar.

Optional sanitary butterfly valve

Optional stainless-steel cart to hold the shell while raising and lowering.

Easy cleaning of shells

 

SPECIFICATIONS:

Shell working capacities: 1, 2 and 3 cu.ft.

Shell speed: Fixed speed – 18 rpm, Variable speed up to 25 rpm.

Intensifier bar speed: 3300 rpm

Electrical: 208, 3 Phase, 60Hz.

Materials of Construction:

Enclosure, the lift arms, the clamp, the shaft and the caster hardware are all made of 304 SS.

V-Shells are made of 316L SS

cGMP Valve: 316L SS with #4 finish on the valve body and #7 finish on the vane, valve lining is made

of FDA approved platinum-cured silicone rubber.

Shell Gaskets: FDA approved white Nitrile rubber

Safety guard: Frame is made of aluminum and the panels are made of ½” thick acrylic.

Shell finish: Outside – Ra about 20 micro inches (= #4 finish); inside – Ra about 12 micro inches (between #4

finish and #7 finish).

Dimensions of the machine without the guard: 37” W x 74” L x 82” H

Dimensions of the machine with the guard installed: 60” W x 90” L x 82” H

Dimensions of the guard in retracted shape: 3’ W x 5’ L x 6.5’ H

Floor space needed with guard on: 14’ x 12’

Drive Station (Fixed Speed of 25 RPM) without Intensifier Bar Drive arrangement, 304SS Enclosure and Casters

Optional Variable Speed for shell (3-20 RPM)

$4,625.00

Intensifier bar drive arrangement includes Coupling for Drive Shaft (required for intensifier bar or SIFT-N-BLEND®

$16,425.00

Optional Variable Speed Drive for the Intensifier Bar Drive required for SIFT-N-BLEND®

$4,625.00

V-Shell or Bins, 316L SS with cGMP Valve From 1 CFT to 3 CFT

From $9,175.00 to $11,495.00

High speed intensifier bar 316L SS From 1 CFT to 3 CFT including coupling for vessel

From $4,150 to $5,595

SIFT-N-BLEND® assembly From 1 CFT to 3 CFT

From $4,895.00 to $6,895.00

Call For Additional Options and Pricing