USED 2021 OKUMA LT-3000EX 3 TMY

17.7” X 34” CNC Turning Center with Okuma OSP-P300LA THiNC Control, (3) 16 Station Radial Turrets (2 Upper + 1 Lower), Y - Axis on All Three Turrets, Hainbuch TOPlus 52 Mini Main Spindle Chuck, Hainbuch TOPlus 40 Mini Sub-Spindle Chuck, Big Bore Configuration on Both Spindles (3.58” Bore), TAS-C Thermo Active Stabilization, Chuck Open / Close During Rotation, Collision Avoidance System, Hi-Cut Pro, LAP-4 (Canned Lathe Cycles and Sub - Routine Calling), Load Monitor, MT Connect Capability, Negative Tool Radius Compensation, Pitch Error Compensation, Spindle Sync Tapping (Live Tooling Spindle), Tool Wear Compensation, Liquid Cooled Headstocks (Both Spindles), Chuck Air Blow, Coordinate Conversion / C-X Countouring, Helical Cutting for X - C - Z, Synchronized Tapping, Universal Hardwired Barfeeder Interface, FMB 8-80/12’ Bar Feeder w/ Two Channel Sets (1.375” & 1.5”), Okuma Tool Touchsetter (Automatic Type),  MP-1200 Mist Collection System (Fixed Pressure), Splash Gun, Side - Mounted Hinge Chip Conveyor, Chuck Air Blow and Sub - Spindle work Ejector.GENERAL SPECIFICATIONS CapacitySwing Over Bed:                    21.65”Swing Over Saddle:                    21.65”Distance Between Spindle Noses:            47.24”Max. Recommended Turning Diameter:        17.7” Max. Recommended Turning Length:        34.02”Coolant Tank Capacity:                88.8 GallonsFloor Space (W/o Chip Conveyor):        157” X 108” X 105”Machine Weight:                    29,260 LbsAxis TravelsX - Axis (All Turrets):                10.04”Y - Axis (When Equipped):                4.92” (+2.755” / -2.165”)ZA - Axis:                        18.9”ZB - Axis:                        36.61”ZC - Axis:                        18.9”W - Axis:                        37.01”Rapid TraverseX - Axis:                        1,181 IPMY - Axis:                        788 IPMZ -  Axis:                        1,574 IPMW - Axis:                        1,574 IPMMain Spindle (Big Bore Configuration)Spindle Motor:                    30 / 20 HP Max. Torque:                        315 / 207 Ft-LbsSpindle Nose:                    A2-8Speed Range:                    50 - 4,200 RPMSpindle Bore Diameter:                3.58”Spindle Bearing Inner Diameter:            5.51”Actuation:                        KitagawaSub - Spindle (Big Bore Configuration)Spindle Motor:                    30/20 HPMax. Torque:                        315/207 Ft-LbsSpindle Nose:                    A2-8Speed Range:                    50 - 4,200 RPMSpindle Bore Diameter:                3.58”Turret (Three Total)Configuration:                    2 Upper Turrets + 1 Lower TurretAll 16 Station Radial Type Turrets (Multitasking)Turret Coupling:                    Crown Gear EngagementTurret Clamping:                    Hydraulic Non-LiftIndexing Time:                    1 Sec / Station (1.4 Sec / 180°)Through-Tool Coolant Prep:            7MPa (1,000 PSI)Live Tooling on All Stations:            YesY - Axis on All Three Turrets:            YesLive Tooling (M - Spindle)Motor Power:                        9.5 / 5.5HPSpeed Range:                    50 - 60,000 RPMCollet Type:                        ER32Max Collet Grip Diameter:                0.75”Live Tool Stations:                    All 16 Stations on Each TurretSynchronized Tapping:                IncludedINCLUDES: Okuma OSP-P300LA THiNC Control, (3) 16 Station Radial Turrets (2 Upper + 1 Lower), Y - Axis on All Three Turrets, Hainbuch TOPlus 52 Mini Main Spindle Chuck, Hainbuch TOPlus 40 Mini Sub-Spindle Chuck, Big Bore Configuration on Both Spindles (3.58” Bore), TAS-C Thermo Active Stabilization, Chuck Open / Close During Rotation, Collision Avoidance System, Hi-Cut Pro, LAP-4 (Canned Lathe Cycles and Sub - Routine Calling), Load Monitor, MT Connect Capability, Negative Tool Radius Compensation, Pitch Error Compensation, Spindle Sync Tapping (Live Tooling Spindle), Tool Wear Compensation, Liquid Cooled Headstocks (Both Spindles), Chuck Air Blow, Coordinate Conversion / C-X Countouring, Helical Cutting for X - C - Z, Synchronized Tapping, Universal Hardwired Barfeeder Interface, FMB 8-80/12’ Bar Feeder w/ Two Channel Sets (1.375” & 1.5”), Okuma Tool Touchsetter (Automatic Type),  MP-1200 Mist Collection System (Fixed Pressure), Splash Gun, Side - Mounted Hinge Chip Conveyor, Chuck Air Blow and Sub - Spindle work Ejector.