USED 2006 MARK ANDY 2200-H
Overview
Description
2006 10" 6 COLOR MARK ANDY 2200 ONLY 23 METER HOURS!!
Specifications
| Width | 10 in | 10 in |
|---|---|---|
| Colors | 6 | 6 |
| Die Stations | 2 | 2 |
| Sheeting Die Stas | Yes | Yes |
| Pitch | 1/8 C.P. | 1/8 C.P. |
| Unw | 40 in | 40 in |
| Rew | 24 in | 24 in |
| # Prod Rew | 2 | 2 |
| # Waste Rew | 2 | 2 |
| Laminating | Yes | Yes |
| Type Of Drying | ALL HOT AIR WITH UV LAST STATION | ALL HOT AIR WITH UV LAST STATION |
| Type Of Slitting | KNIFE | KNIFE |
| Web Guide | YES | YES |
230 VOLTS, 60HZ
Equipped With
>1 40 Inch Unwind Module with Electronic Web Guide and Vertical Dancer
> 3 Double Print Module with Latch in Style Inking Cassette, 1/2 Inch Plate Roll Pins
> 1 Enhanced Hot Air Dryer System, 6 color
> 6 Meter Roll Assembly for use with Doctor Blade
> 6 Ceramic Anilox Rolls - Harper
> 6 Half Speed Gear and Bearing Set for Anilox Roll
> 6 Doctor Blade Assembly
> 1 Diecutting Module with Two 2-1/2 inch Slots & Steel Frames
> 2 4 Inch 1/8CP Base Roll Kit for 10 Inch
> 1 Side Adjust Bearing Block Set, 1 Inch
> 1 Waste Wind Up, Diecut Position, 24 Inch Capacity
> 1 Pacing, Sheeting & Master Control Module
> 1 Drive Unit & Power Pack 10 HP
> 1 Upper Rewind, 2HP
> Additional Accessories:
> 1 UVT Maxim 400 Watt Single Lamp UV System
> 1 Laminator Assembly, 24 Inch Diameter Capacity
> 3 Die Adapter for Mark Andy Tooling Only
> 1 RD Scoring Unit
> 1 Waste Wind Up. Sheeting Position, 24 Inch Capacity
> 1 Circular Knife Slitter with 3 Knives and Holders
> 1 Lower Rewind, 2HP