USED NORTON LCTU

NORTON LCTU HEAVY DUTY PLAIN OD GRINDER ( RECONDITIONED )
SPECIFICATIONS:

36″ x 12″ x 8″ WHEEL CAPACITY

30″ SWING OVER TABLE

96″ CENTERS

VARIABLE SPEED HEADSTOCK

HAND OPERATED TAILSTOCK

AUTO PLUNGE CYCLE ….. ( RAPID INFEED TO POSITIVE STOP )

HYDRAULIC TABLE TRAVEL

PICK FEED AT TABLE REVERSAL

ABOVE THE WHEEL PROFILE DRESSER
SCOPE OF WORK TO RECONDITION NORTON GRINDER
1) SEMINOLE MACHINERY to disassemble grinder, clean and check base for excessive wear and stress fractures.

2) Clean and inspect component parts, replace any component parts that are worn or broken with remanufactured parts.

3) Grind, Scrape and Flake traverse table ways to original tolerance.

4) Grind, Scrape and Flake cross slide ways to original tolerance.

5) Re-build grinding wheel spindle as necessary.

6) Re-build hydraulic pump. Re-pair as necessary all hydraulic valves. NEW Filters & Hoses

7) Re-build lubrication system as necessary with New & Rebuilt PARTS

8) Re-build HEADSTOCK as necessary, Install NEW Headstock Variable Speed Drive & Motor

9) Re-build TAILSTOCK AS NECESSARY

10) Hand feed assembly to be completely disassembled, cleaned and inspected.

INSTALL NEW BEARINGS & NEW COMPONENTS AS NECESSARY

11) Electrics: New or rebuilt components as necessary

ALL ELECTRIC MOTORS REBUILT WITH NEW BEARINGS

All push bottoms to be repaired as necessary.

12) Coolant tank cleaned and checked.

COOLANT PUMP REBUILT

13) MACHINE to be thoroughly cleaned and painted with industrial grade Dupont Dulex epoxy paint.

Color of your choice.
FILE PHOTOS ATTACHED OF A PREVIOUSLY RECONDITIONED MACHINE