NEW YAMA SEIKI HD-3012

Model: HD-3012
X-axis travel: 3,000 ( 118.11″ )
Y-axis travel: 1,200 mm ( 47.2″ )
Z-axis travel: 760 ( 29.92″ )
Dist. form spindle nose to table top: 200 ~ 960 mm ( 7.87″ ~ 37.7″ )
Dist. between columns: 1,300 mm ( 51.1″ )
Table size ( X direction ): 3,000 ( 118.11″ )
Table size ( Y direction ): 1,100 mm ( 43.3″ )
Table load capacity: 5,500 ( 12,120 )
Spindle taper: CAT50
Spindle power ( cont. / 30 min. ): 22 / 26 ( 30 / 35 ) kW ( HP )
Spindle speed: 6,000 rpm
X-axis rapid feed rate: 20,000 mm/min. ( 788  IPM )
Y-axis rapid feed rate: 24,000 mm/min. ( 945 IPM )
Z-axis rapid feed rate: 15,000 mm/min. ( 590 IPM )
Cutting feed rate: 10,000 mm/min. ( 394 IPM )
Tool magazine capacity: 32 ( Opt. 40 )
Max. tool diameter / adj. pocket empty: Ø 125 mm / 229 mm ( Ø 4.92″ / 9.01″ )
Max. tool length ( from gauge line ): 400 ( 15.74″ )
Max. tool weight: 15 kg ( 33 lb )
Positioning accuracy ( JIS B 6338 ): ± 0.015 ( 0.0006″ ) / Full travel
Positioning accuracy ( VDI 3441 ): P ≤ 0.025 ( 0.001″ ) / Full travel
Repeatability ( JIS B 6338 ): ± 0.003 ( 0.00012″ )
Repeatability ( VDI 3441 ): Ps ≤ 0.02 ( 0.0008″ ) / Full travel
Power requirement: AC 220 ± 10% 3 Phase , 60 / 50 Hz / 50 kVA
Pneumatic pressure requirement ( min. ): 5 ~ 8 kg / cm² ( 71 ~ 113.6 PSI )
Lubrication oil tank capacity: 4.5 L
Hydraulic unit tank capacity ( pump ): 48 liter, [ 3 HP ]
Coolant tank capacity ( pump ): 400 L ( 1 HP )
Machine weight: 22,500 ( 49,600 lb )