NEW OUTOTEC PF1225 30/35 M15 1 60

Graphite Processing PlantGrinding Mills:
SAG Mill: One (1)
Make: Outotec
Type: Trunnion Supported SAG Mill
Condition: New in OEM Packaging (In Storage since 2018)
Size: 3.7m Diameter x 1.5m Effective Grinding Length (12.1ft Dia. x 4.9ft)
Discharge: Grate Discharge  
Liner: Poly-Metallic Liners
With Motor
Power Output: 350HP
Voltage: 575V
With a 250kW Variable Speed Single Pinion SCIM Drive
Make: Outotec
Type: Trunnion Supported SAG Mill
Condition: New in OEM Packaging (In Storage since 2018)
Size: 3.7m Diameter x 1.5m Effective Grinding Length (12.1ft Dia. x 4.9ft)
Discharge: Grate Discharge  
Liner: Poly-Metallic Liners
With Motor
Power Output: 350HP
Voltage: 575V
Power Output: 350HP
Voltage: 575V
With a 250kW Variable Speed Single Pinion SCIM Drive
Rod Mill: One (1)
Make: Outotec
Type: Trunnion Supported Rod Mill
Condition: New in OEM Packaging (In Storage since 2018)
Size: 2.7m Diameter x 4.1m Effective Grinding Length (8.8ft Dia. x 13.5ft)
Discharge: Overflow Discharge
Liners: Cr-Mo Steel Liners (Note: Rods May Have Been Replaced with Ceramic Balls to Avoid Damaging the Large Flakes)
With Motor:
Power Output: 450HP
Voltage: 575V
With a 340kW Variable Speed Single Pinion SCIM Drive  
Make: Outotec
Type: Trunnion Supported Rod Mill
Condition: New in OEM Packaging (In Storage since 2018)
Size: 2.7m Diameter x 4.1m Effective Grinding Length (8.8ft Dia. x 13.5ft)
Discharge: Overflow Discharge
Liners: Cr-Mo Steel Liners (Note: Rods May Have Been Replaced with Ceramic Balls to Avoid Damaging the Large Flakes)
With Motor:
Power Output: 450HP
Voltage: 575V
Power Output: 450HP
Voltage: 575V
With a 340kW Variable Speed Single Pinion SCIM Drive  
Polishing Mills: Two (2)
Make: Outotec
Type: Trunnion Supported Ball Mills
Condition: New in OEM Packaging (In Storage since 2018)
Size: 3.2m Diameter x 5.6m Effective Grinding Length (10.5ft Dia. x 18.4ft)
Discharge: Overflow Discharge 
Liners: Rubber Liners
With Motors:
Power Output: 1000HP
Voltage: 4160V
With a 725kW Variable Speed Single Pinion SCIM Drives
Make: Outotec
Type: Trunnion Supported Ball Mills
Condition: New in OEM Packaging (In Storage since 2018)
Size: 3.2m Diameter x 5.6m Effective Grinding Length (10.5ft Dia. x 18.4ft)
Discharge: Overflow Discharge 
Liners: Rubber Liners
With Motors:
Power Output: 1000HP
Voltage: 4160V
Power Output: 1000HP
Voltage: 4160V
With a 725kW Variable Speed Single Pinion SCIM Drives
Polishing Mills: Two (2)
Make: Outotec
Type: Trunnion Supported Ball Mills
Condition: New in OEM Packaging (In Storage since 2018)
Size: 2.7m Diameter x 4.1m Effective Grinding Length (8.9ft Dia. x 13.5ft)
With Motors:
Power Output: 450HP
Voltage: 575V
With a 340kW Variable Speed Single Pinion SCIM
Make: Outotec
Type: Trunnion Supported Ball Mills
Condition: New in OEM Packaging (In Storage since 2018)
Size: 2.7m Diameter x 4.1m Effective Grinding Length (8.9ft Dia. x 13.5ft)
With Motors:
Power Output: 450HP
Voltage: 575V
Power Output: 450HP
Voltage: 575V
With a 340kW Variable Speed Single Pinion SCIM
Filter Presses:
Make: Outotec
Concentrate Filter-Press: PF1225 
Model: PF1225 30/35 M15 1 60
Condition: New in OEM Packaging (In Storage since 2018)
Hydraulic Unit & Air Release Tank (Fully Assembled)
Tailings Filter-Press: FFP102
Model: FFP1516 30/40 M60
Condition: New in OEM Packaging (In Storage since 2018)
With Hydraulic Power Unit & Water Station
Disassembled in (4) 40ft HC Containers
Overall Dimensions:
Length: 13,460mm
Width: 3,834mm
Height: 4,515mm
Weight: 50,000 kgs
Concentrate Filter-Press: PF1225 
Model: PF1225 30/35 M15 1 60
Condition: New in OEM Packaging (In Storage since 2018)
Hydraulic Unit & Air Release Tank (Fully Assembled)
Model: PF1225 30/35 M15 1 60
Condition: New in OEM Packaging (In Storage since 2018)
Hydraulic Unit & Air Release Tank (Fully Assembled)
Tailings Filter-Press: FFP102
Model: FFP1516 30/40 M60
Condition: New in OEM Packaging (In Storage since 2018)
With Hydraulic Power Unit & Water Station
Disassembled in (4) 40ft HC Containers
Overall Dimensions:
Length: 13,460mm
Width: 3,834mm
Height: 4,515mm
Weight: 50,000 kgs
Model: FFP1516 30/40 M60
Condition: New in OEM Packaging (In Storage since 2018)
With Hydraulic Power Unit & Water Station
Disassembled in (4) 40ft HC Containers
Overall Dimensions:
Length: 13,460mm
Width: 3,834mm
Height: 4,515mm
Weight: 50,000 kgs
Length: 13,460mm
Width: 3,834mm
Height: 4,515mm
Weight: 50,000 kgs
Flotation Equipment:
12 Flotation Cells (No Platework)
The Components to Fabricate the Cells and Columns were Partially Delivered - Fabrication Halted with Financing went Uncompleted
The Components to Fabricate the Cells and Columns were Partially Delivered - Fabrication Halted with Financing went Uncompleted
8 Flotation Columns (No Platework)
The Components to Fabricate the Cells and Columns were Partially Delivered - Fabrication Halted with Financing went Uncompleted
The Components to Fabricate the Cells and Columns were Partially Delivered - Fabrication Halted with Financing went Uncompleted
Thickeners:
9m Concentrate Thickener
Feed Rate, Dry: 6.7 TPH
Weld-Type
Work Completed/To Be Done:
Tank (Divided in 2 Half Sections) - 100% Welding Complete, Paint Remaining
Bridge - 100% Welding Complete, Paint Remaining
Columns and Brace - 100% Complete
Rake - 100% Complete
Drive and Feed - Not-Started
Feed Rate, Dry: 6.7 TPH
Weld-Type
Work Completed/To Be Done:
Tank (Divided in 2 Half Sections) - 100% Welding Complete, Paint Remaining
Bridge - 100% Welding Complete, Paint Remaining
Columns and Brace - 100% Complete
Rake - 100% Complete
Drive and Feed - Not-Started
Tank (Divided in 2 Half Sections) - 100% Welding Complete, Paint Remaining
Bridge - 100% Welding Complete, Paint Remaining
Columns and Brace - 100% Complete
Rake - 100% Complete
Drive and Feed - Not-Started
15m Pre-Concentrate Thickener
Feed Rate, Dry: 7.5 TPH
Bolt-Type
Work Completed/To Be Done:
Tank - 100% Complete
Bridge - 100% Complete
Column and Brace - 100% Complete
Rake - 100% Welding Complete, Paint Remaining
Feed - Welding 50% (Can Confirm with More Accuracy in Spring)
Drive - Not-Started
Feed Rate, Dry: 7.5 TPH
Bolt-Type
Work Completed/To Be Done:
Tank - 100% Complete
Bridge - 100% Complete
Column and Brace - 100% Complete
Rake - 100% Welding Complete, Paint Remaining
Feed - Welding 50% (Can Confirm with More Accuracy in Spring)
Drive - Not-Started
Tank - 100% Complete
Bridge - 100% Complete
Column and Brace - 100% Complete
Rake - 100% Welding Complete, Paint Remaining
Feed - Welding 50% (Can Confirm with More Accuracy in Spring)
Drive - Not-Started
18m Tailings Thickener
Feed Rate, Dry: 17.6 TPH
Bolt-Type
Work Completed/To Be Done:
Tank - 100% Complete
Bridge - 100% Complete
Column and Brace - 100% Complete
Rake - 100% Welding Complete, Paint Remaining
Feed - Not Started
Drive - Not Started
Feed Rate, Dry: 17.6 TPH
Bolt-Type
Work Completed/To Be Done:
Tank - 100% Complete
Bridge - 100% Complete
Column and Brace - 100% Complete
Rake - 100% Welding Complete, Paint Remaining
Feed - Not Started
Drive - Not Started
Tank - 100% Complete
Bridge - 100% Complete
Column and Brace - 100% Complete
Rake - 100% Welding Complete, Paint Remaining
Feed - Not Started
Drive - Not Started
Location: Eastern Canada
View More Ore Processing Plants