USED 2011 WOTAN WOMAT M3 FT-P

WOTAN WOMAT M3 FT-P Horizontal Boring Machine, used, features 4.7" boring diameter, 50 HP spindle, and extensive travel ranges. Equipped with SIEMENS SINUMERIK control. Ideal for complex, large workpieces with its advanced rotary table and precision capabilities.

SPINDLE DIAMETER: 4.7”
RAM CROSS SECTION: 13” X 13”
TOOL HOLDER: ISO 50
MAIN POWER SUPPLY: 50 HP
SPINDLE SPEED: 5 TO 3000 RPM
CROSS TRAVEL (X): 157.4”
VERTICAL TRAVEL (Y): 118”
RAM TRAVEL (W): 39”
SPINDLE TRAVEL (Z): 23.6”
TABLE SIZE: 78.5” ROUND (ROTARY)
FEED RANGE (X, Y, Z, W): .04 TO 393 IPM
RAPID TRAVERSE (X, Y, Z, W): 787 IPM
INSTALLATION AREA REQUIRED: 270 CU. FT.
.

Rotary Table (B-Axis): Usually equipped with a massive integrated round
A rotary table (often 78.5 inches in diameter) for rotating heavy
workpieces to any angle.
Ram Cross Section: 13” x 13”
Taper in Spindle: ISO 50
Main Spindle Power: 50 HP (37 kW}
Spindle Speed Range: 5 to 3,000 RPM
B-Axis (Table Rotation):360 continuous indexing
The B-axis is indeed a fully programmable, continuous
360,000-position rotary table (offering 0.001 resolution).
Simultaneous Multi-Axis Milling: It doesn't just rotate to a face and lock down.
The table can smoothly spin while the X, Y, and universal head axes are moving.
This allows for cutting complex, large-diameter helices, continuous
circular profiles, or sprawling curved geometries on a 15-ton part.
Precision Angular Alignment: If an aerospace casting or wind turbine component
is clamped down slightly out of square, the 0.001 degree indexing lets the operator
(or a probing cycle), rotate the table to perfectly align the part coordinate
system without physically rebuilding the fixture setup.

SIEMENS SINUMERIK CNC CONTROL
WOTAN SOUND ENCLOSURE
5-AXIS HEAD