USED Roser MC24 KNIFE-HOLDER CLEANING MACHINE

The Roser Model MC24 Knife-Holder Cleaning Machine is designed exclusively for washing knives in knife holders and guarantees the correct level of hygiene. The Roser Model MC24 Knife-Holder Cleaning Machine is highly recommended for all industries in the food sector and was designed taking into account the basic concepts of hygiene and safety.
The Roser Model MC24 Knife-Holder Cleaning Machine mainly consists of a stainless steel tank chamber that is sealed via a hinged door. Inside the chamber features a water spray system driven by a centrifugal pump through appropriate pipes. The Roser Model MC24 Knife-Holder Cleaning Machine's control panel includes stop-and-start buttons, cycle start, wash time selector (cycles available 2 minutes, 4 minutes or 6 minutes), and wash water and rinse water temperature
indicators. Heating system by means of electric resistance (6kW) for the washing water tank is controlled by thermostat and temperature probe.
RAM Manufacturing Equipment located in Corona, California, offers training, installation, service and parts for all the machines we sell. Including the Roser Model MC24 Knife-Holder Cleaning Machine and many others. Call or visit us today for more information!
Call, Email or Visit at:
951-734-8152
235 Benjamin Dr. Suite 102
Corona, CA 92879
[email protected]
All #304 Stainless Steel Construction
Capacity in each wash: 24 ROSER knife holder
Support on height-adjustable feet
The opening of the door causes the immediate stop of the machine
The electrical resistances that heat the water in the tank and in the heater have an anticontact cover
The control panel is powered by low voltage (5V)
Wash water and rinse water temperature indicators
stop-and-go buttons
cycle start and wash time selector (cycles available 2 minutes, 4 minutes or 6 minutes)
Proportional soap dispenser
Washing water impulse pump
Spraying system by means of rotating panels with stainless steel injectors in the upper and lower part
Water recovery tank with automatic level control (maximum and minimum) and water inlet electro-valve
The machine is designed exclusively for washing knives in knife holders
Guarantees a correct level of hygiene
Recommended mainly for industries in the food sector
Built taking into account the basic concepts of hygiene and safety
Washing with pressurized water in a closed circuit, with automatic soap dosage
Rinsing with network water accumulated in the washing tank, disinfection by means of water spray at 80 degrees Celsius

Dimensions (L x W x H): 41.7" x 35.4" x 81.8"
Cycle Time: 2 minutes, 4 minutes or 6 minutes
Capacity: 24 Knife Racks
External Basket Dimensions: 33.4" x 25.1"
Washing Tank Capacity: 53 liters
Water Consumption: 6L/cycle
Water Inlet Connection: 3/4" male
Drainage dimensions: 1_1/2" male thread
Installed power: 15 kw
Electrical Supply: 400V – 50 Hz – 3Ph + N + Gnd (Ask for other voltages and frequencies)
Weight: 507 lbs. (230 kg.)